Features
1. Configuration: 5-meter LED strip light, power supply, controller and remote. It is environmental-friendly, energy-saving, and easy to install and use.
2. Capable of color shift between white and warm white, and better lighting effect with the use of a controller.
3. Using quality 3528 SMD, 600 LEDs/5meters, high-brightness strip light with every 2 LEDs in a row on the PCB.
4. View angle 120º, with 6 LEDs in one series line.
5. Working voltage: DC24v; working current: 2A
6. PCB dimension: 5000*15*0.2mm
7. Power input: 100-240V/AC50/60HZ; power output: DC24V/2.5A
8. Waterproof level: IP20, CE, ROHS approved.
Note:
Do pay attention to the anti-static measure on the LEDs.

Specifications
Absolute Maximum Rating at TA=25℃
| Parameters | Symbol | Maximum | Unit |
| Forward Current | IF | 200 | mA |
| Power Consumption | PD | 4.8 | W |
| Electrostatic Discharge | ESD | 800 | V |
| Working Temperature | Topr | -25∽+60 | ℃ |
| Storage Temperature | Tstg | -40∽+80 | ℃ |
Electrical / Optical Characteristics at TA=25℃
| Parameters | Symbol | Condition | Min | Typ | Max | Unit |
| Forward Voltage | VF | IF=200mA | 23.5 | 24 | 24.5 | V |
| Peak Wavelength | λD | IF=200mA | -- | -- | -- | nm |
| Color Temperature | TC | IF=200mA | 3000 | 3200 | 3500 | k |
| 6000 | 6500 | 7000 | k | |||
| Luminous Intensity | φV | IF=200mA | -- | 180 | -- | lm |
| Recommend Forward Current | IF(rec) | -- | -- | 200 | - - | mA |
Note
1. The tolerance of the luminous flux is ±15%;
2. The above specification parameter is for the product in 0.5meter only
3. Sample testing, for your reference only
4. Please use the accessories we offered only. Don't press on the strip light and keep them away from erosive environment. Otherwise, we will not take responsibility for damage caused by any improper use mentioned above.
Controller
Connection
①Power supply
②Controller
③Flexible strip
Controller
Function of Controller Button

| Symbol | Spec | Function instruction |
![]() |
OFF/ON | Turn on / Turn off the LED controller |
![]() |
MODE | To adjust the display mode |
![]() |
BRT+/BRT- | To increase/decrease the brightness of the LED, totally 256 levels for the brightness |
![]() |
SPEED+/SPEED- | To increase/decrease the speed of color change |
Malfunction Analysis and Solutions
| Phenomenon | Analysis | Solutions |
| Unable to Work When Power is on | 1. No electricity passing through the switch driver. 2. Wrong connection between positive and negative. 3. Power wires connection is incorrect or loose. 4. Flaw LED | 1. Check the switch driver 2. Revise the poles into correct connection. 3. Check wire connection. 4. Replace the LED. |
| Uneven Brightness | 1. Too long wire makes the voltage drop. 2. Too thin wire makes voltage drop. 3. Too much load for power supply. 4. Too much load for controller. | 1. Shorten the wire. 2. Change wire with enough thickness. 3. Change power supply with enough capability. 4. Use the amplifier. |
Note: To avoid unexpected defects, please use the product and accessories we offer only.
Dynamic Mode
| Button | Mode |
| Flash | Color shift between white and warm white |
| Fade | Color fade from white to warm white |
Accessory
![]() |
![]() |
![]() |
![]() |
Accessory connection
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Packing

Standard Packing
1. 1 set including: 5-meter strips, 1 pc power supply, 1 pc controller, 30pin connector, and 1 blister package.
2. 10 sets in 1 carton
3. Gross weight: 550g/set
4. Carton dimension: 410*325*395mm
